Fisher & Paykel GW703 Very Slow Water fill

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher & Paykel GW703 Very Slow Water fill

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 29, 2008 at 12:41 pm #39073
    alex2008
    Participant

    Fisher & Paykel GW703 has a problem with very slow hot & cold filling. I mistakenly connected the hot to the cold and cold to the hot – temporarily.
    With the correct hot & cold connections it fills very very slowly. No other problems seem to exist.
    When entering last fault diagnostics (Hold wash temp down then power (no beeps) then spin buttons to toggle until hold and slow spin are lit) the only lights showing simultaneousley are water level High and Low.

    Any help would be muchly appreciated.

    September 1, 2008 at 10:31 pm #261201
    bigsmokepiker
    Moderator

    Re: Fisher & Paykel GW703 Very Slow Water fill

    generally cold water valve Fault Part # 426143 about $45 AUD
    Simple to change Numerous threades in his forum.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.