servis M6006 keeps on filling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › servis M6006 keeps on filling

Viewing 15 posts - 1 through 15 (of 21 total)
1 2
  • Author
    Posts
  • September 1, 2008 at 10:42 am #39121
    richy
    Participant

    Hi guys any help would be apreciated i have got two servis washing machines, mod number M6006W and M6002W both with the same fault.
    Both machines keep on filling up on all programmes even when spin cycle is selected. Pump is working ok and machine stops filling when unpluged.

    September 1, 2008 at 11:54 am #261358
    robbra
    Participant

    Re: servis M6006 keeps on filling

    Hi,
    try resetting the programme knob to stop for 10 seconds with power on as the module can remember parts of previous programmes, or check pressure pots for blockage or failing that would be module. Have cleared this fault a few times by just resetting programmer knob.
    Rob

    September 1, 2008 at 3:16 pm #261359
    Washman
    Participant

    Re: servis M6006 keeps on filling

    Hi

    Its a module fault have changed quite a few.

    Mike

    September 1, 2008 at 5:20 pm #261360
    Bill
    Participant

    Re: servis M6006 keeps on filling

    Yes I agree its a module failure.

    Bill Ellis

    September 1, 2008 at 6:05 pm #261361
    grazzamongrel
    Participant

    Re: servis M6006 keeps on filling

    hi where do you get a cheap enough module to repair these servis applainces as everytime i come across a module failure the part is £80ish plus vat (from Connect). any advice or help would be greatly appreciated.
    ta graham AGM SERVICES

    September 1, 2008 at 7:37 pm #261362
    boselecta
    Participant

    EMW electronics.
    very recomended.
    http://www.emwelec.co.uk/

    September 1, 2008 at 8:01 pm #261363
    deltra
    Participant

    Re: servis M6006 keeps on filling

    just bought new module for m6006 £33 connect 😯

    September 1, 2008 at 8:30 pm #261364
    leavemetogetonwithit
    Participant

    Re: servis M6006 keeps on filling

    deltra wrote:just bought new module for m6006 £33 connect 😯

    How? Comes up £86.25 for me. 😡
    Mike.

    September 2, 2008 at 8:41 pm #261365
    deltra
    Participant

    Re: servis M6006 keeps on filling

    part number SER546071000. £33.99+ maybe my complaining to my rep about prices might `ave helped 😆

    September 2, 2008 at 8:46 pm #261366
    timdowning
    Participant

    Re: servis M6006 keeps on filling

    £109.25 for me!!! 😯

    September 3, 2008 at 8:02 am #261367
    grazzamongrel
    Participant

    Re: servis M6006 keeps on filling

    £103.50 for me. i called my rep for connect and he didnt seem very keen with the whole discount idea. Just gave some rubbish about having to build a case for me to present to his bosses to see whether i warranted any discount!!!!!

    September 3, 2008 at 10:15 am #261368
    robbra
    Participant

    Re: servis M6006 keeps on filling

    Just a thought,
    That module pictured is not the right one for a M6002.
    Should be either
    546089200 or
    546087500 depending on date of manufacture
    so that won’t fit whatever the price.
    Same for the M6006
    546089200 or
    546098900
    Serial number would give correct part
    Rob

    September 3, 2008 at 6:17 pm #261369
    leavemetogetonwithit
    Participant

    Re: servis M6006 keeps on filling

    546089200 £76.43 546098900 and 87500 £84.15 each. We should all get Deltra to buy them for us.
    Mike.

    September 3, 2008 at 9:10 pm #261370
    deltra
    Participant

    Re: servis M6006 keeps on filling

    just been on connect to check 😉 their code 5031681173016 module for m6006 is £33+ 😀 motor £53+

    September 3, 2008 at 10:12 pm #261371
    leavemetogetonwithit
    Participant

    Re: servis M6006 keeps on filling

    Module£86.25. Motor £53.94. 😕
    Mike.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 21 total)
1 2
  • You must be logged in to reply to this topic.