Lg Intellowasher DD 7kg

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Lg Intellowasher DD 7kg

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 3, 2008 at 10:19 am #39192
    mentorman
    Participant

    First of all hi to everyone who uses these forums as i am a Newbie . I am needing a bit of TECHNICAL advice concerning a second hand washing machine i have just bought . It is MODEL WM 1080 FHD white front loader washing machine with DIRECT DRIVE . The washing machine works fine but with one small fault . When i program the onboard computer to start a wash , i get an error message in the digital display of de which means door not closed correctly. This message goes off after 2 minutes and the washer starts up with no problems . I have cleaned out the door catch and tightened up the hinges on the door a little but still same problem. It is the sensor on the door catch which is causing the problem . I am hoping someone knows of a service engineers codes to reset my MACHINE to hopefully cure this little glitch . Any other suggestions would be gratefully appreciated to try and get my LG INTELLOWASHER DD 7KG running 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} again. It would cost a fortune to call out a service engineer for a technical glitch as you can imagine .
    Thanks in advance from Steve .

    September 3, 2008 at 7:13 pm #261601
    Penguin45
    Participant

    Re: Lg Intellowasher DD 7kg

    You can’t re-code a slow door interlock, you can only replace it. spares@ukwhitegoods.co.uk should be able to get one for you.

    Penguin45.

    Lucky Goldstar

    September 3, 2008 at 7:33 pm #261602
    mentorman
    Participant

    Re: Lg Intellowasher DD 7kg

    Thanks very much for your reply Penguin45 i will look into that and find out how much a new door catch will be !

    September 3, 2008 at 11:36 pm #261603
    Penguin45
    Participant

    Re: Lg Intellowasher DD 7kg

    Door interlock……….

    Penguin45.

    September 4, 2008 at 3:47 am #261604
    admin
    Keymaster

    Re: Lg Intellowasher DD 7kg

    Hi

    Have you made sure that the pin that holds the door handle into place hasent slipped out ?.

    If it hasnt then the main PCB will be at fault normally not the interlock.

    Bryan

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.