Induction Hob

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Induction Hob

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 8, 2008 at 10:43 am #39309
    rocker
    Participant

    I am changing over an exisiting halogen hob, to this new induction hob, will the exisiting wiring be ok, or do i need to upgrade or change anything, as i have never fitted one before.

    Any advice would be helpful. 😀


    Thanks,
    John.

    September 8, 2008 at 3:47 pm #261990
    PGS
    Participant

    Re: Induction Hob

    A few things to consider.1 what is the total wattage. 2 what size cable is being used. 3 What size mcb is in mains and is the earthing loop impedance upto standard regs.

    September 9, 2008 at 7:51 am #261991
    rocker
    Participant

    Re: Induction Hob

    Thanks PGS, havent got a earth loop tester, I can test between live to earth proving earth is present, but thats it…will it need testing with loop tester, and is it law !!
    Cheers John

    September 9, 2008 at 8:00 am #261992
    Martin
    Participant

    Re: Induction Hob

    rocker wrote:Thanks PGS, havent got a earth loop tester

    Here’s one…….!!!!:wink:

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=36717

    September 9, 2008 at 11:22 am #261993
    admin
    Keymaster

    Re: Induction Hob

    Martin !!

    Have you been hiding in that shed and supping the happy juice again behind our backs ??

    now I know I sent you those CHER pics a while ago but i would have thought you would have worn them out by now.

    B

    September 9, 2008 at 11:56 am #261994
    Martin
    Participant

    Re: Induction Hob

    r600a wrote:Have you been hiding in that shed and supping the happy juice again behind our backs ??

    Shame on you Bryan, you promised not to tell anyone about my illicit still in my cedar clad Boggy Marsh shed!

    r600a wrote:now I know I sent you those CHER pics a while ago but i would have thought you would have worn them out by now.

    They are getting tatty I must admit!:rotl:

    September 9, 2008 at 3:27 pm #261995
    rocker
    Participant

    Re: Induction Hob

    Cheers Martin, will contact John.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.