wf541

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wf541

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 11, 2008 at 4:43 pm #39407
    AAT
    Participant

    Hi
    I have been out to a wf541 the on/off light was stuck on, the machine woulndnt do anything. got the machine back to the shop and it worked ok.
    tested again later, now no lights at all. have got power to machine and i have cleaned all the connectors.
    any ideas
    cheers tim

    September 13, 2008 at 7:40 am #262339
    grazzamongrel
    Participant

    Re: wf541

    try replacing module as these can cause most of the faults you find on these wf models..they are a pain in the a@@e also check the cable from power module to the display module and thinking about it check the display module too. these machines are tricky little bu@@ars.

    HTH :rolls: 😕

    September 13, 2008 at 9:00 am #262340
    trotter
    Participant

    Re: wf541

    I am sure you will have already checked?……….. But is the clear plastic behind the switches broken or getting jammed?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.