- This topic has 5 replies, 2 voices, and was last updated 17 years, 7 months ago by
.
-
Posts
-
My Whirlpool ADP 5442 WH keeps restarting once a job is done. I usually use the 50 degrees program, and I have not verified the problem with other programs (yet).
Is the mainboard faulty, or what could be wrong? Anyone experienced similar problems?
Re: My Whirlpool ADP 5442 WH keeps restarting
Check that model number please, can’t find anything on it. The 12nc number (Starts with 8) would be even better.
Penguin45.
Re: My Whirlpool ADP 5442 WH keeps restarting
Mod. ADP 5442 WH
Typ: NGPM
Board Service: 447111
Data: 447101
(Under CE): 41921021
SERVICE: 8542 442 61710
SER: 33 0143 005209I guess you mean one of the service numbers above. Now you have everything :)[/img]
Re: My Whirlpool ADP 5442 WH keeps restarting
Thanks for that. Unfortunately, it’s still not coming up on my tech disc, so I presume that this must be pretty new. If you’re still i9n guarantee, use it.
Logically, the fault is not logical……… It might just be as simple as a sticky start button not releasing properly; I’d be rather more suspicious of the pcb.
Penguin45.
Re: My Whirlpool ADP 5442 WH keeps restarting
It’s not new – It came with the apartment I recently bought. I talked to a service dealer and they suggested that the unit might be 5-10 years old.
I highly doubt that it’s the startbutton, as it’s an electrical short circuit button (if you call it that) – not mechanical. Worst case it could be electrical conductive dust causing a shortcircuit, but then it would more likely start/stop all the time, and not just restart everytime when it’s done.
- You must be logged in to reply to this topic.