ADP 8322 – Not washing/spinning!!??

Guys / Girls,

Would really appreciate some help / advice!?

Got an ADP 8322. Have had a few problems in the past and many thanks to this site have managed to sort them all (so far!) At the minute the machine is put on to wash and doesn’t do alot of washing!

No fault codes / beeps etc sound and it seems to the untrained eye (me!) that it is / has completed it’s cycle ok. While doing the biz it sounds like it is draining / filling ok(and when i look there is “hot” water in bottom) but doesn’t sound like the spray bars are spinning during the cycle (confirmed by dirty dishes at the end!) I have put these (all three spray arms) in a “certain” position and closed the door, re-opened shortly after and they have not moved at all. When i think i should hear them spinning there is a bit of a rumbling noise (similar but not as loud as when spray support bar lugs were broken (before i replaced) and the pipe was “popping out” – hope that bit makes sense!?)

Having read a number of posts on here i’m guessing it’s either pointing to the capacitor or the circulation pump (or both?). Does this sound correct and if so how can i confirm / test them (if at all)?

If it helps previous problems i’ve had are (1) water level sensor in sump (black grill) needed cleaning (2) spray support bar changed (twice) and the main one was (3) anti flood switch kept faulting as i found very small hole (where rubber pipe perishing) on circulation pump pipe (yes the big atoll). As it was bonded on i cut it off and replaced with random rubber pipe (off a hoover of all things). Sorry to waffle on but thought it was best to list these in case connected to current fault!!……….

Any help / advice would be great!

Thanks for your time!

Mark