Bosch classixx 1400 express constant filling of water

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Bosch classixx 1400 express constant filling of water

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #39598
    Davronn
    Participant

    Hi
    My machine is about 3 yrs old and is a real workhorse. Has suddenly bagan to constantly fill with water throughout cycles and drains when required so doesnt overfill.. It only fills when on a cycle not when switched off.The machine agitates as normal but doesnt go into a spin cycle. If i dont turn water off it would still fill with water when putting machine on a spin or drain cycle. ?? Any ideas greatly appreciated Thanks
    :rolls:

    #262915
    Martin
    Participant

    Re: Bosch classixx 1400 express constant filling of water

    Water has got into the front panel electrics and stuffed the programme module I suspect. 😥 What’s the Enr number of the machine anyway?

    #262916
    Davronn
    Participant

    Re: Bosch classixx 1400 express constant filling of water

    Hi number is WF02867GB/12 cant think how water would of got into panel ? cheers

    #262917
    nomadPaul
    Participant

    It could be a slow closing water inlet valve ? when the machine is over-filling during a cycle , turn the selector switch to off , pull out the detergent drawer and look to see if water is still trickling in from the holes in the ‘roof’ part of the machine where the drawer comes from.

    #262918
    Davronn
    Participant

    Re: Bosch classixx 1400 express constant filling of water

    Ive checked the inlet valves and they are A ok. Its not letting any water in at all when off and out of a programme. ?? HELP

    #262919
    Penguin45
    Participant

    Re: Bosch classixx 1400 express constant filling of water

    Triac on pcb which operates the relevent solenoid will have failed in the “on” position. New computer required.

    Penguin45.

    #262920
    Davronn
    Participant

    Re: Bosch classixx 1400 express constant filling of water

    Thanks all ive bitten the bullet and ordered new pcb. What an excellent helpfull bunch you all are !!! 😛

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.