- This topic has 2 replies, 2 voices, and was last updated 17 years, 6 months ago by
.
-
Posts
-
15 month old Hoover Nextra HNL6166 not draining.
Filter and drain checked and clear of obstructions. Pump tested on the bench and powers up OK but does not appear to receive power at the appropriate part of cycle.
Please advise other possible causes, is this a faulty control board?
Re: Hoover Nextra HNL6166 not draining
I don’t know that particular model off the top of my head, but those Hoovers do stupid things when the heater is O/C.
Beside that you could check the valves and pressure system before looking at the PCB
Make sure the machine is unplugged before you check tho. DO NOT do any live testing! :zap: :zap: :zap:
Re: Hoover Nextra HNL6166 not draining
Given the uncertainty of diagnosis and cost of the replacement board I called in the local repair guy. The control board was indeed dead but the root cause of failure was unusual. Seems the AC supply to the drain pump had been arcing at the connectors on the pump. The two cables are very close together and separated only by very thin plastic at this point. The arcing had taken out a component on the board.
- You must be logged in to reply to this topic.