Miele T689

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele T689

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 29, 2008 at 1:23 pm #39813
    rocker
    Participant

    No heat in this T/D. I have been told that the newer versions are easier to work on as the back plate comes off and you can get to heater ok.
    But the older ones the drum has to come out to access the heater, lot of work, can anyone tell me which model I have.
    (Dont work on Miele often)

    Thanks John.

    September 29, 2008 at 7:15 pm #263693
    clayside
    Participant

    Re: Miele T689

    Sorry to say this is the one where you have to remove back of drum 😯
    clayside

    September 29, 2008 at 7:40 pm #263694
    rocker
    Participant

    Re: Miele T689

    Cheers Clayside. John

    September 30, 2008 at 6:38 am #263695
    Seamy
    Participant

    Re: Miele T689

    Thermostat trouble probably, you’ll see them when you take out the backplate, heater can be dismounted & unplugged from loom and inspected. Elements rarely go though.

    October 2, 2008 at 1:54 pm #263696
    rocker
    Participant

    Re: Miele T689

    cheers Seamy, turned the job down as another engineer told me it is a long and difficult job.
    Cheers for your advice John

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.