- This topic has 1 reply, 2 voices, and was last updated 17 years, 6 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Called to this m/c today, reported fault was dead appliance. Tested voltage to mains filter then to selector switch on front of m/c at 230v in but nothing out, although im not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure what readings I should be getting from what terminals, is this selector a known fault on these or am i barking up the wrongin.
Re: Zanussi ZWF1640w
I have never had that selector switch fail but that’s not to say it isn’t faulty.
Have you taken the board out and had a look for any blow marks. Not to long ago there was a spate of door locks failing blowing the pcb, user interface and analogue pressure switch (basically all the low voltage components) just a thought
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.