- This topic has 4 replies, 2 voices, and was last updated 17 years, 6 months ago by
.
-
Posts
-
hi i have come across an Indesit Widl102 where it was sticking on the wash cycle so i checked the obvious and the heater was defo burnt out and o/c so i replaced it with a similar element from a hotpoint model. done it loads before and never a problem. but cust called to say it is still just washing on and on and on.
any ideas guys
appreciate any help on this
grazza
Re: Indesit Widl102 Sticking On Wash Cycle
it is a washing machine not a washer dryer and i would appreciate any help. 🙁 🙂 😀
Re: Indesit Widl102 Sticking On Wash Cycle
i have just been back to customer and even with the variable temperature selector turned to the frost symbol which i assume is “off” i can still hear the heater on and so it seems the heater is getting turned on and staying on through out the cycle possibly even on rinse as cust says clothes came out nice and warm.
would module cause this fault or maybe a stat??
Re: Indesit Widl102 Sticking On Wash Cycle
You could give Tony at EMW a ring and see what he thinks, 0115 9652118.
Very odd fault. Would have thought it has either to be connection problem or module. Would have thought it would have thrown up an error code and ought to have either not heated or boiled if sensor/relay was not working.
Mike.
- You must be logged in to reply to this topic.