wma63 spin fault

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › wma63 spin fault

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 6, 2008 at 7:55 pm #40006
    hotpointless
    Participant

    Hi Guys
    Me again – and I’m hotpointless again out in the sticks

    This time everything works except the last bit rinse and spin and the drum simply turns slowly around (as does the motor) is it time to call it quits and get a new machine or is this likely to be something simple?

    Thanks in advance.

    Hotpointless in the Yorkshire Dales

    October 6, 2008 at 9:24 pm #264444
    hotpointless
    Participant

    Re: wma63 spin fault

    Hi Just gone through all the stickies and other advice re not spinning
    The thing still wont spin and does not seem to have rinsed properly either – washes ok though.

    October 6, 2008 at 10:00 pm #264445
    iadom
    Moderator

    Re: wma63 spin fault

    What happens if you try the machine when it is completely empty of clothes and water, does it appear to be emptying as quickly as normal?

    If it will not go into spin when it is empty you may have a partial obstruction in the sump hose behind the lower back panel.

    Plug out if you intend to have a look, ( you just knew I was going to add that bit, didn’t you ) 😀

    Jim.

    October 6, 2008 at 10:51 pm #264446
    hotpointless
    Participant

    Re: wma63 spin fault

    Doh 😳
    Some people have short memories lucky for me my wife is younger than me and still can remember my 1st post
    http://www.ukwhitegoods.co.uk/modules.p … highlight=

    This time; lolly stick and bit of unidentifiable clothing. :rolls:
    Spinning like a good ‘un again 😀
    Thanks IADOM for a prompt (in more ways than one) answer. 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.