Hotpoint WD64

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WD64

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 9, 2008 at 10:33 pm #40104
    rocker
    Participant

    water leaking from front of soad dispenser when filling, have taken out dispenser and fill hose to tub, no blockages .turn down water pressure.
    has anyone else had this fault.
    Cheers John.

    October 9, 2008 at 10:45 pm #264769
    AMS
    Participant

    Re: Hotpoint WD64

    These washer dryers are very intolerant of high water pressures, especally when filling on a 40 degree wash when both hot and cold are coming in. Always managed to cure it by backing off the water pressures. Also, check the vent at the back for blockages.

    Dave

    October 10, 2008 at 3:24 pm #264770
    wilf
    Participant

    Re: Hotpoint WD64

    no short cuts I’m afraid clean the duct, its the only vent. seems that every time I’ve had this I’ve always ended up doing this.

    wilf

    October 10, 2008 at 4:07 pm #264771
    rocker
    Participant

    Re: Hotpoint WD64

    Cheers Dave & Wilf, sure its the rear vent as you both suggest, never checked this part last visit.

    John

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.