- This topic has 1 reply, 2 voices, and was last updated 17 years, 6 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi
The problem I have is the above machine fills, drum rotates anticlockwise, has a long pause and rotates anticlockwise again and carrys on with this through wash and rinse cycles, drains ok but no spin.
New brushes (old ones very worn) and board has come back from QER ok
Thanks in advance
JohnRe: Hoover SE230
The direction change relay is bound to be on the main module. I suggest you send the board back to QER. I also suggest you read this thread:
http://www.ukwhitegoods.co.uk/modules.p … ic&t=35764
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.