BOSCH WTL5400GB/04 TUMBLE DRYER PROB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BOSCH WTL5400GB/04 TUMBLE DRYER PROB

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 10, 2008 at 3:18 pm #40119
    OLLIE2806
    Participant

    I have the above tumble dryer with the following symptoms:-

    When cupboard dry is chosen the m/c works o.k for the start, then
    when the m/c moves from dry to iron dry along the top led’s the sign for the filter comes on and very soon after the m/c just stops with the end sign on.
    I’m suspecting the sensor in the ducting below the door, Any thoughts would be much appreciated.

    Thanks
    Ollie.

    October 11, 2008 at 11:35 am #264827
    wench
    Participant

    Re: BOSCH WTL5400GB/04 TUMBLE DRYER PROB

    Have you checked the condensor? I’ve had this fault before when the condensor was gunged up at the back. Just took it out to the garden and hosed it down. 🙂

    October 11, 2008 at 11:55 am #264828
    OLLIE2806
    Participant

    Re: BOSCH WTL5400GB/04 TUMBLE DRYER PROB

    Thanks mate, I’ll have a look.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.