WHIRLPOOL DISHWASHER ADG4952M F4 FAULT

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WHIRLPOOL DISHWASHER ADG4952M F4 FAULT

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 16, 2008 at 1:27 pm #40254
    talkingtent
    Participant

    Hi there I am going to look at this Whirlpool built in dishwasher ADG4952M customer says it is flashing F4 fault, anyone know what F4 is ?
    Thanks James

    October 16, 2008 at 1:38 pm #265286
    bzz67
    Participant

    Re: WHIRLPOOL DISHWASHER ADG4952M F4 FAULT

    first page on known error codes, looks like drain fault.

    October 17, 2008 at 12:43 pm #265287
    talkingtent
    Participant

    Re: WHIRLPOOL DISHWASHER ADG4952M F4 FAULT

    Checked pump all ok selected any program no fill for a few mins then F4 fault?? In the test mode it fills then heats then after heated F4 fault flashes. The fault guide say F4 is drain pump,control board OWI (what is OWI ?) or water indicator defect (What is water indicator defect?). Any help anyone James.

    October 17, 2008 at 1:22 pm #265288
    bzz67
    Participant

    Re: WHIRLPOOL DISHWASHER ADG4952M F4 FAULT

    OWI is optical water indicator, this is a sensor, circular in shape in the right hand side of the sump. it measures water flow i believe, i think i had a fault once where i only had to clear blokages in the spray arms to cure it, it just allows the water to run through the system faster.
    having said all that, i think this model is fitted with a pressure switch. same position as the OWI would be. they get blocked up with gunge.
    if you get me the service number i will be able to tell you whats fitted

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.