Hotpoint wm31 cuts out

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint wm31 cuts out

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 19, 2008 at 3:06 pm #40326
    sandysuds
    Participant

    Hi Guys
    been at a hotpoint wm31 after 5 mins no matter what programm
    it cuts dead no lights at all ,have changed interlock tested wiring etc mains lead and resistor,sent board to emw for test and repair ,
    Still doing the same im stumped can anyone help

    thank you
    sandy.

    October 19, 2008 at 3:40 pm #265790
    Phidom
    Participant

    Re: Hotpoint wm31 cuts out

    Mains filter? I would try connecting the meter to C and N interlock wires and monitoring the voltage until it cuts out.

    October 19, 2008 at 4:23 pm #265791
    sandysuds
    Participant

    Re: Hotpoint wm31 cuts out

    its a wma 31p

    October 19, 2008 at 10:36 pm #265792
    Phidom
    Participant

    Re: Hotpoint wm31 cuts out

    Your point being? I realise it won’t have individual wires to the interlock but you can still improvise a way to rig the meter probes.

    October 20, 2008 at 2:26 pm #265793
    wilf
    Participant

    Re: Hotpoint wm31 cuts out

    on off switch burnt?

    wilf

    October 23, 2008 at 10:51 pm #265794
    sandysuds
    Participant

    Re: Hotpoint wm31 cuts out

    Thanks for all your help guys ,much appriciated,
    It turned out that the board was faulty

    October 24, 2008 at 7:02 am #265795
    Phidom
    Participant

    Re: Hotpoint wm31 cuts out

    EMW cocked it up then?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.