Zanussi W/D – Prob

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi W/D – Prob

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 30, 2008 at 6:55 pm #40638
    OLLIE2806
    Participant

    Hi guys,

    Zanussi W/D WJD1457W – 91460140700

    The above machine kept throwing up an E10 fault so i cleaned out the condenser thouroughly (which was very blocked) and i fitted a 3way valve. The cust said it worked once now the count down timer doesn’t go down and it cuts out. Any ideas?

    Thanks as always

    Ollie.

    October 30, 2008 at 7:34 pm #267095
    Penguin45
    Participant

    Re: Zanussi W/D – Prob

    Lower dryer NTC can cause odd faults.

    Chris.

    October 30, 2008 at 11:45 pm #267096
    Minge
    Participant

    Re: Zanussi W/D – Prob

    E10 is the dryer inlet valve fault. More than likely the ‘3 valve’ type in which case is normally the green one but you can by the complete valve assembly.

    October 31, 2008 at 7:54 am #267097
    OLLIE2806
    Participant

    Re: Zanussi W/D – Prob

    THANKS GUYS

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.