Diplomat ADP 8101 / 2

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP 8101 / 2

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 2, 2008 at 11:42 am #40695
    undomestic
    Participant

    Hi all.

    Any assistance appreciated here. Recently moved in to a house with the said dishwasher. Previous occupants left manuals for every other appliance apart from the dishwasher.

    When starting a cycle (either cold rinse or wash) it just hum’s like if the motor is doing something. That never ends. No water appears inside. On the front In-progress & Salt are lit up.

    have checked the water pipe, and that is turned on. what else should I check for.

    thanks again.
    u

    November 2, 2008 at 12:44 pm #267253
    kwatt
    Keymaster

    Sounds as if there may well be something blocking the pump, that’s the first thing I’d check.

    K.

    November 2, 2008 at 12:51 pm #267254
    Penguin45
    Participant

    Re: Diplomat ADP 8101 / 2

    Initial sequence upon starting the programme should be drain, followed by fill. If you are certain that the water is on and flowing the problem may be either the flood protection system activated (Water in base raises float, works switch and over-rides the timer) or the timer not advancing off the drain position (Can you hear it ticking?).

    Power off if you plan to investigate this yourself.

    Penguin45.

    November 2, 2008 at 9:32 pm #267255
    undomestic
    Participant

    Re: Diplomat ADP 8101 / 2

    Thanks all, will check and get back with finding.

    Cheers

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.