Bosch SGS4332GB/17 Upper Spray Arm

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch SGS4332GB/17 Upper Spray Arm

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 2, 2008 at 7:35 pm #40698
    lunkwill
    Participant

    Hi, can you let me know how the upper spray arm is attached on the Bosch SGS4332GB/17? It had fallen off, and as I couldn’t re-attach it I ordered a new one from UKWhitegoods (very prompt delivery & good price).

    But I can’t attach the new one either 😳 , even with the new mounting that came in the kit (Bosch part number 298594).

    Is there a knack? the instructions that came with the part are not much help.

    Many thanks in anticipation.

    Steve Rickard

    November 2, 2008 at 8:08 pm #267275
    nomadPaul
    Participant

    is it just the top arm that spins round that has come off ?

    If so , it is held on with the knurled nut that comes with it . If you hold the spray arm with the holes pointing upwards , insert the securing nut through the centre , offer the two up to the arm on the bottom of the top basket and when its in , turn the nut to lock it in. Can’t rememebr which way , but it will lock it self in with only a 45-90* twist

    November 2, 2008 at 8:53 pm #267276
    smartin
    Participant

    Re: Bosch SGS4332GB/17 Upper Spray Arm

    the mounting from memory clips on at front end and back at the same time, take your time and work out logically where it would clip into and it will make sense, sorry cant be any more help as has been a while since i last fitted one

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.