Hotpoint SDW80 d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint SDW80 d/w

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 10, 2008 at 11:46 pm #40936
    Penguin45
    Participant

    Called to this originally as dead, no display. Have fitted bit100 pcb C00110348, which has brought the display and machine to life. However…. upon starting, it goes into test mode (ROD on display) and you are supposed to press and hold “start” to cancel test programme and it doesn’t……… The on/off button will switch the machine on but not off; the start button appears to be completely ineffective, although you can feel it “click” when pressed.

    Allowed test sequence to finish, the display went to END, then brought up a group of dotted lines across the screen.

    It won’t programme – stumped.

    Any ideas?

    S/no 51118 4142.

    Chris.

    November 11, 2008 at 12:24 am #268090
    aqualectric
    Participant

    Re: Hotpoint SDW80 d/w

    Door catch in the closed position? :duck:

    Steve.

    P.S. Is it a FDW80??

    November 11, 2008 at 12:29 am #268091
    Penguin45
    Participant

    Re: Hotpoint SDW80 d/w

    aqualectric wrote:Door catch in the closed position? :duck:

    Nope – give me a little bit of credit…… :rolls:
    😀

    aqualectric wrote: Is it a FDW80??

    Nope – defo an SDW80T – slimline in linen with display. Indesit in a skirt really.

    Chris.

    November 11, 2008 at 12:43 am #268092
    helo_75
    Participant

    sdw80

    does exist, but theres no bulletin about that

    might even be a faulty pcb

    have you tried putting old one back, resetting it, then refitting the new one?

    November 11, 2008 at 12:47 am #268093
    helo_75
    Participant

    but i got a manual……

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.