- This topic has 4 replies, 3 voices, and was last updated 17 years, 5 months ago by
.
-
Posts
-
Programme starts and drum fills with water OK. Depending on programme drum may rotate for a few seconds, but eventually on any programme, nothing further happens apart from a regular click from the programme control dial/pcb area.
If I advance dial manually to the rinse section of cycle, machine empties and refills, but then stops again with just the regular click.
Drum empties OK on setting no.13.
There’s nothing stuck in the pump impellor area. Brushes were replaced just over a year ago. Machine is 8-10 years old.
Once or twice since fault has developed machine has tripped the circuit, and there’s possible some sign of burning on one or two of the resistors on the main pcb.
Please tell me its not terminal!!
Re: Bosch WFF 1201 not progresssing through cycle
I think I’d be hoiking the motor out for another look……
Power off first, please.
Penguin45.
Re: Bosch WFF 1201 not progresssing through cycle
Do you mean in order to replace the motor? And if so, is that a job for a pro?
Thanks
i think mr p is hinting at the brushes
just cos its only 12 months it isnt an issue, id check them properly
- You must be logged in to reply to this topic.