LG WM1480FHD Bearings

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG WM1480FHD Bearings

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 19, 2008 at 9:29 am #41144
    Toni
    Participant

    Hi
    I will be doing a bearing change on this machine at the weekend, not having done one of these before I would like to go prepaired if I can.
    eg. Do I need any special tools (Torx etc)? I have a torx set but its getting a bit worn so not sure if I should invest before I do this job
    Any other information that might be useful?

    Cheers
    Toni


    Lucky Goldstar

    November 19, 2008 at 6:51 pm #268940
    smartin
    Participant

    Re: LG WM1480FHD Bearings

    10mm socket, decent philips screwdriver, pair of pliers and a large tapometer, 😉

    November 19, 2008 at 7:19 pm #268941
    alro
    Participant

    Re: LG WM1480FHD Bearings

    Treat it same as a zanussi everthing throw front thou like wma machines
    cheers alro

    November 19, 2008 at 10:38 pm #268942
    leavemetogetonwithit
    Participant

    Re: LG WM1480FHD Bearings

    Some LG’s have strange size pulley bolts. Take your complete socket set.
    Mike.

    November 20, 2008 at 2:17 pm #268943
    Toni
    Participant

    Re: LG WM1480FHD Bearings

    Thanks for replies gents 😀

    November 20, 2008 at 10:09 pm #268944
    leavemetogetonwithit
    Participant

    Re: LG WM1480FHD Bearings

    Just one other thing. Screws are usually very tight. Go prepared for that.
    Mike.

    November 20, 2008 at 10:35 pm #268945
    trotter
    Participant

    Re: LG WM1480FHD Bearings

    And a copper faced tapometer is best 😉

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.