Indesit WIDL1265 LEDS

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #41222
    pawwavingpuppy
    Participant

    I’ve just found this amazing site, and apologies if this has been answered previously.

    My Indesit WIDL1265 (which I have hated since day 1) πŸ‘Ώ is flashing like a christmas tree. Just went to put it on and all the LED’s are going beserk……Well my oven has given up the ghost this week, the fan refuses to work, the blower on my car heater has packed up, and now this, please help…….

    Many thanks

    #269168
    iadom
    Moderator

    Re: Indesit WIDL1265 LEDS

    If they are all flashing wildly then it sounds as though your main PCB has failed, sadly a very common and expensive repair on these machines. πŸ˜₯

    If the Start light is flashing rapidly and one or two of the option lights are flashing more slowly then we would need to know the number of the flashing lights from left to right or top to bottom.

    Jim.

    #269169
    pawwavingpuppy
    Participant

    Re: Indesit WIDL1265 LEDS

    Please dont laugh or not believe me, but I’ve just gone and give it a dam good kick, sorry but what with the oven and the car this really was the final straw :violent: …and all the lights went out, I’ve just put it on a wash, and it lives, it washes………well its started πŸ˜€ and water is going in and its going round…woo hoo………..now I might just give the oven and car a dam good hiding πŸ˜†
    Will now try and find out what wrong with my oven!!!!

    Will definately keep this site in my favorites
    Thanks

    #269170
    iadom
    Moderator

    Re: Indesit WIDL1265 LEDS

    Believe me 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the lads on the trade side would like to kick every single one of these into oblivion. :rolls: πŸ˜₯

    If it happens again then after removing the mains plug you could try tightening up all the wiring connections between the console module and the main module in the base.

    Jim.

    #269171
    pawwavingpuppy
    Participant

    Re: Indesit WIDL1265 LEDS

    That sounds a bit too technical for me, a swift kick worked wonders.
    However, I will certainly keep a note of your advice….thanks πŸ˜€
    I’m the same as everyone at the mo, money is very tight, and I didnt want to have to fork out on a new washing machine.
    Hope it dont snow or freeze up overnight, coz the blower on my car heater has packed up, it’ll be great fun at 5.30am in the morning πŸ™ trying to see where i’m going πŸ‘Ώ or should I pull a sickie 😯
    It dont rain(or snow) but it pours. πŸ˜†

    Thanks again!!!

    #269172
    stebboo
    Participant

    Re: Indesit WIDL1265 LEDS

    Hi,
    I’m having an error code problem with the same model of washer/dryer. Is the anyone out there who can translate the code for me?
    I have 2 lights that are flashing, light 1 (Delay Timer) which is flashing slowly and the door lock which is going mad.
    I have performed the minimal IT repair job of turning it off and on again but it’s still flashing.
    Thanks in advance…

    #269173
    Penguin45
    Participant

    Re: Indesit WIDL1265 LEDS

    Ah…. The F08 Fault Code of Death. Strictly speaking it means that the heater relay on the computer board is stuck. In practice, the heater may have failed, the heater wiring may have failed or there may even be a problem with the water level control switch. Some years of dealing with these horrible things would suggest that well over 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time it’s the pcb.

    Power off if you’re going to investigate, please.

    Penguin45.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.