Almost dead Beko

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Almost dead Beko

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 24, 2008 at 8:17 pm #41289
    spark
    Participant

    Hello to all.
    Beko WMA 510 W.On startup, pump runs for about 7 seconds.
    After this no more action..no fill.

    Thanks

    November 24, 2008 at 10:47 pm #269435
    house_doctor
    Participant

    Re: Almost dead Beko

    Have you checked the brushes on the motor. Beko’s lock up the moment the motor stops responding.

    November 25, 2008 at 3:37 am #269436
    spark
    Participant

    Re: Almost dead Beko

    Thanks house_doctor,will try this and let you know the result.
    As I’ve often said on this forum I come from cam switch era and never fully got to grips with the electronic era.

    November 26, 2008 at 7:37 pm #269437
    neptune
    Participant

    Re: Almost dead Beko

    This seems to occur when operator changes prog selector during operation. Try this. Select a wash prog switch on. press start. you should now have only the wash light lit. If the light to the right of wash is lit also, you have not yet cleared previousprog. If only wash light is lit, it should then fill. Had this today. Machine now fills and agitates, but no heat. heater tests ok. going back tomorrow.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.