Asko WM110

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Asko WM110

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 25, 2008 at 11:48 am #41304
    clivejameson
    Participant

    Does anyone have the tech info on this one by any chance?….

    The problem is simply no spin, tumble ok, pressure system etc ok, motor ok, pump/filter ok 😕

    November 25, 2008 at 2:19 pm #269481
    eastlmark
    Moderator

    Re: Asko WM110

    should be a wiring diagram tucked in the top near the timer…… think that one may have a combined motor….uses induction for wash and brushes for spin…forgive if I am wrong, doing it from memory!

    November 25, 2008 at 3:49 pm #269482
    Washman
    Participant

    Re: Asko WM110

    Hi

    From service manual
    Motor is a 8 pole combined capacitor motor and a commutator motor . The 8 pole section drives the motor at normal wash speed with reversing, while the commutator section produces the 900 rpm and 1400 rpm spin speeds .The motor is protected by a built in thermal overload cutout.

    Wiring diagram should be in with the timer.

    Mike

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.