- This topic has 3 replies, 2 voices, and was last updated 17 years, 4 months ago by
.
-
Posts
-
Hi there
I hope Im in the right place. I have a zanussi oven & it has one of those glass ceramic hob thingys. 🙂
It works fine but the glass bit has come unstuck from the oven somehow and is now on a slant and lifting higher and higher on one side.
Is there some sort of glue that I could use on it to seal it back down?
Thanks …Paula
Re: Zanussi Oven Ceramic Hob – help please……
There are high temperature bonding agents available. It might help if you posted the model number or pNc of your appliance – that way we might be able to look at the etch info on the machine and see how complex a repair might be.
Penguin45.
Re: Zanussi Oven Ceramic Hob – help please……
Looks like a tricky one. The glass is bonded to the top surround. A proper repair would involve removing the entire top and fully separating the glass from the frame. It all has to be thoroughly de-greased and THIS STUFF applied liberally. Might be worth buying two tubes….. Weight the whole lot together for at least 24 hours using Encyclopedia Brittanica to ensure a good bond.
Good luck!
Penguin45.
- You must be logged in to reply to this topic.