Fisher DD603H

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Fisher DD603H

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 27, 2008 at 6:11 pm #41390
    S1MON
    Participant

    Showing F1 Fault for top draw only

    Bottom draw works fine

    Have been there and replaced bottom pcb and main pcb, and upper lid motors as the leak was from there. But the m/c will still only run for approx 2-5 ses and start F1 again. The base is bone dry and the m/c meggers fine!!

    Any other ideas

    Cheers 🙁

    November 28, 2008 at 6:04 am #269976
    bigsmokepiker
    Moderator

    Re: Fisher DD603H

    Suggest you check the link arms are not snapped
    Also have had this problem were the heater plate is stuffed

    November 30, 2008 at 11:08 am #269977
    S1MON
    Participant

    Re: Fisher DD603H

    link arms are ok, I will check the heater plate cheers

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.