whirlpool d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool d/w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 1, 2008 at 4:04 pm #41475
    kevinlewis
    Participant

    model: adp 4601
    bottom door seal need replacing.
    customer tried then another engineer tired both failed is this a tricky job? how best to go about it?
    not to familair with this hoping someone could help?
    thanks

    December 1, 2008 at 4:29 pm #270311
    johnmac11
    Participant

    Re: whirlpool d/w

    Haven’t done one for a few years but if this is the type of seal that fits into a fold in the bottom of the inner door you will be lucky to fit it. I always fit new inner doors in this case which used to come with the seal attached.


    John

    December 1, 2008 at 7:55 pm #270312
    lerch
    Participant

    Re: whirlpool d/w

    I agree with johnmac11. 😀

    Buy the inner door otherwise they always bloody leak, to much messing around backwards and forwards as it never leaks when you are there.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.