- This topic has 4 replies, 3 voices, and was last updated 17 years, 4 months ago by
.
-
Posts
-
Hello,
My Bosch WFF2001 will not fill on most settings at a temperature of 40 degrees or above. However, if I lower the temperature to 30 degrees it bursts into life and does a full wash cycle. It does start up on 40 degress on the Wool cycle but I think that may be a special case of cold fill only.I have inspected the inlet filters on both hot and cold but they were clean.
Would I be right in thinking that the next step is to replace the hot inlet valve?
Best wishes,
PeterRe: BOSCH WFF2001GB/01 No hot fill
Not quite, the next step would be to test the hot valve for continuity/resistance. 😉
Jim.
Re: BOSCH WFF2001GB/01 No hot fill
Power off before doing this. Also are you in a flat with low hot water pressure?
S.
Re: BOSCH WFF2001GB/01 No hot fill
Thanks to both for the replies.
Yes, the hot fill valve is clearly open circuit, while the two cold fill valves have a resistance of about 3 kilohms. So, I will order a new hot fill valve with confidence.
Yes, I do live in a flat with low pressure but the machine has been working here for the past 10 years. And I recently moved the cold water tank into the loft, to give extra pressure for a shower. I don’t suppose that would have made any difference to the hot fill valve. Or would it??
Peter
- You must be logged in to reply to this topic.