- This topic has 13 replies, 6 voices, and was last updated 17 years, 3 months ago by
.
-
Posts
-
The naturally conservative (with a small c) folks around here dont seem to be tempted to buy this eastern tat, so this is the first one i’ve had a call for.
Its an old customer, so i feel obliged to at least lift the lid before helping her to take it to the skip. ANYWAY, Mod, according to my punter is HW-C1280 Dunno if that makes sense?Basically, she says the digital display is locked on one prog & wont respond to any dial twirling. Worth a look, or a waste of Diesel??
Thanks, Eddie.oooh hang on
switch it on.. press the start / pause button then switch it off
if that dont work scrap it
does anyone know why the dishwasher flood the floor.
Been to loads at the moment all 2 months old but when you test these creatures they fill up to normal level.
Expertcat
Re: My first Haier…. HELP!!!!!!!!!!!!!!!!!
Hi Expertcat,
The common reason is that the customer uses tablets, they don’t dissolve completely and it overfoams and then floods into the base when it gets to a rinse. This problem is worse if the customer uses 3/1, 4/1 etc. tabs and then rinse aid as well. The base floods and it blows up.
Sometimes they even work for a bit after you tell the customer that. 😉
Another one is that if you open the door once filled it creates a “wave” that overflows into the base and blows it up.
Other than that, they just leak and then, blow up.
HTH
K.
helo_75 wrote:oooh hang on
switch it on.. press the start / pause button then switch it off
if that dont work scrap it
Cheers helo, do i keep the start/pause button pressed as i switch it off ?
I’ll have a poke around it to keep her sweet but i certainly aint getting involved in a big way, i have told her the likely outcome in advance 😉no.. pause it then switch it off!!
then switch it back on and see it if makes a diffprobably wont, but worth a try
Re: My first Haier…. HELP!!!!!!!!!!!!!!!!!
Went to this today, tried helo’s tip of on/ start/pause off. Bugger me it worked 😯 Thanks helo 😉
So all the while my punter was practically draped over my shoulder noting what i was up to. Was she pleased when greeted with the sight of a working machine again?? Was she bollox, “oh you could have told me that over the phone , you get your money easy dont you” etc etc.Even when i reduced my callout to £20 basically just to cover my costs she was still implying i should be wearing a mask.. cant bloody win can we 👿
Re: My first Haier…. HELP!!!!!!!!!!!!!!!!!
😆 i think helo was taking the michael when he suggested that, but if dead pan humour fixes appliances its another good tool to have 😉
Re: My first Haier…. HELP!!!!!!!!!!!!!!!!!
Well, she & her hubby had been fiddling with the thing for days, to no avail. Her saviour (me) got it back to normal in approx 4 secs. So, make of that what you will. Anyway, like i said, you cant win with some peeps. 🙁
no, i wasnt taking the michael… its a known thing
its the only way to reset it
what you should do for future reference, is take the lid off, take the three screws off the bezel, remove it with pcb in tact, pretend to mess with the pcb with yer meter.. puit it all back together, then charge em £80 for buying a pile of sh!t
the facts dont change, whether they think it was easy or not, they didnt know did they?
nail their hats on, they care little for you
thats what i sayRe: My first Haier…. HELP!!!!!!!!!!!!!!!!!
Youre right helo, if i had known she would turn into a bitch i would have made more of a job of it & charged accordingly. Too honest for me own good 😉 Next time.. next time. 😈
Re: My first Haier…. HELP!!!!!!!!!!!!!!!!!
Madmac wrote
Youre right helo, if i had known she would turn into a bitch i would have made more of a job of it & charged accordingly. Too honest for me own good Next time.. next time.
Its called shooting yourself in the foot. 😆
I’m a past master at it 😥TC
- You must be logged in to reply to this topic.