Diplomat 600Ga (ADPO 150 stainless) oven /grill

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Diplomat 600Ga (ADPO 150 stainless) oven /grill

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 14, 2008 at 10:03 am #41845
    mick1939
    Participant

    This oven/grill was installed 16/01/06 (almost 3 yrs old)
    It has now developed the following fault/s
    1. when lighting the grill,oven door fully open as per manufacturers instructions,the grill comes on with a very low flame.
    It can take usually 2-4 minutes before it “fires” up fully,and a proper fierce flame is established.
    2.when lighting the oven,on No9 as per manufacturers instructions,the oven comes on on a low flame and sometimes goes off,this too takes about 2-4 minutes before it “fires” up fully.
    Have tried “powering down/powering up” the electrics— no difference.
    Any help/suggestions greatfully appreciated.

    December 14, 2008 at 2:52 pm #271526
    Penguin45
    Participant

    Re: Diplomat 600Ga (ADPO 150 stainless) oven /grill

    Probably tired thermocouples – send for your local CORGI repairer. Do not attempt to repair this yourself.

    Penguin45.

    December 15, 2008 at 11:20 am #271527
    mick1939
    Participant

    Re: Diplomat 600Ga (ADPO 150 stainless) oven /grill

    Thanks for advice Penguin,appreciated.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.