LG Tumble dryer

Re: LG Tumble dryer

okay, quick it is.

remove both side panels, undo screws from 1 side of diagonal cross bar on top. undo screws on both bars across top of sides. take out screw securing drawer to back (on the top rhs looking from back). pull back panel back including drum and feed belt down front of drum.

Remove 2 screws securing the cover which covers the fan housing and remove fan housing, remove 2 screws which retain motor bracket and pull towards you and it will swivel out allowing the motor to move up.
With the belt between the front of the drum and the front panel this will give you enough slack to feed it round the fan and onto where it sits on the motor pulley then feed it round the outside of the drum.

As the haynes manual says… the rebuild is a repeat of the disassembly.

oh… dont forget the bandages for the slashed hands from the sharp edges.

All from memory, but I did one on Friday so hopefully have not forgotten anything.