- This topic has 3 replies, 3 voices, and was last updated 17 years, 3 months ago by
.
-
Posts
-
Hi all,
My Hotpoint Aquarius Washer/Dryer recently stopped working, it is 2 years old, and should have been in reasonably good condition.
however, it has stopped working, no lights come on when I plug the machine in, well it blinks for a fraction of a second, and then nothing.It is in a fairly tight area under a counter, not much circulation etc. The plug works fine as does the plug. Was thinking moisture may have somehow disturbed something internally in the machine, as it seems to be dry and no leaks.
Any ideas on what could be wrong or how to fix?
Thanks for your time.Kind Regards,
Baz
Re: Washer/Dryer internal Trip?
1st thing to check is that all of the buttons are free & not sticking, (if any of the option buttons get stuck then you would be unable to turn it on)
if they are all free, then the main module will be faulty as you have power to the machine when the lights flash when turned on,Re: Washer/Dryer internal Trip?
hotpnt wrote:1st thing to check is that all of the buttons are free & not sticking, (if any of the option buttons get stuck then you would be unable to turn it on)
if they are all free, then the main module will be faulty as you have power to the machine when the lights flash when turned on,No buttons are stuck mate.
So I guess it is the main module, is that hard to get fixed?
- You must be logged in to reply to this topic.