wd12s indes**t

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wd12s indes**t

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 13, 2009 at 3:17 pm #42541
    electrofix
    Moderator

    indesit WD12s

    select spin machine starts pumps turns and runs for about 30 secs then stops. flashing 8 on light which is heater relay prob and dial starts turning

    select tumble dry machine works ok

    is there another fault could cause this or is it send the board to EMW

    thanks

    Dave

    January 13, 2009 at 4:24 pm #273861
    iadom
    Moderator

    Re: wd12s indes**t

    It really means send the machine to the tip. :rolls: It could also be the pressure switch, loose wiring, NTC to module connections, chances are it will be the module though. 😥

    At least Tony at EMW will test the module and return for a modest fee if no fault is found on it.

    Jim.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.