indesit wia 101

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit wia 101

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 13, 2009 at 11:30 pm #42566
    tash
    Participant

    hi ..been to an indesit washer wia101 with intermittant flashing lights..customer says the door lock light and anticrease light flash…there are 3 vertical lights for stage in prog indication n then 3 horrizontal lights anticrease far left door lock far right…thought it might be out of balance detection but customer says only washing what she always has..checked brushes heater drain etc..worked ok when i tested it..any help would be appreciated..thanks

    January 14, 2009 at 12:19 am #273988
    helo_75
    Participant

    u mean the pcb is faulty

    give emw a ring, theyre about your best option at this stage

    January 14, 2009 at 8:26 am #273989
    tash
    Participant

    Re: indesit wia 101

    ok thanks..could a worn armature give a fault like this…theres no excessive sparking but the segmants do look unevenly coloured and it sounds very clicky…

    January 14, 2009 at 8:54 am #273990
    Martin
    Participant

    Re: indesit wia 101

    tash wrote:ok thanks..could a worn armature give a fault like this…theres no excessive sparking but the segmants do look unevenly coloured and it sounds very clicky…

    Doesn’t sound good for the motor then. 😉

    January 14, 2009 at 1:22 pm #273991
    Madmac
    Participant

    Re: indesit wia 101

    If you can feel a raised armature segment then thats probably game over. Weeeeee… 😯

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.