hotpoint wf240

This topic has 4 replies, 4 voices, and was last updated 17 years, 2 months ago by tedd.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
January 14, 2009 at 12:33 pm #42578

tedd
Participant

hi ,went to a call for abve machine,the problem is the machine wont start.the door locks but the light does not come on.the wash light comes on and tries to fill for about 1 sec.no other lights on apart fron on/off.anyone come accross this fault regards tedd

January 14, 2009 at 8:36 pm #274032

Penguin45
Participant

Re: hotpoint wf240

If it’s not a “logical” fault, it’s always the pcb.

Chris.

January 15, 2009 at 1:08 pm #274033

tedd
Participant

Re: hotpoint wf240

thanks penguin tedd.

January 15, 2009 at 7:49 pm #274034

kiddo66
Participant

Re: hotpoint wf240

I would check the brushes first.

January 15, 2009 at 8:00 pm #274035

timdowning
Participant

Re: hotpoint wf240

Tug away on the motor connector wires.

They are deceptive B*****S. Remember to label which one goes where before you tug as sometimes 2 or more may be dodgy.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.