- This topic has 4 replies, 4 voices, and was last updated 17 years, 2 months ago by
.
-
Posts
-
Hi guys – hope somebody can help
Problem is – power on ok, water pressure ok. When on button pressed programme lights flash on but then go out and nothing happens when programme button pressed.
Any help gratefully received.
Re: Belling IDW604
Did you manage to find the solution, as I have exactly the same problem with the same model. Dishwasher is about 2 and a half years old, and has been nothing but trouble, replaced under warranty, springing leaks etc.
But at least it worked before……
Re: Belling IDW604
It appears to be one of the Chinese machines. This sounds like a pcb failure.
Penguin45.
Re: Belling IDW604
Belling IDW604 dishwasher problems SCENARIO: Power on and water pressure unchanged from last time. In addition all the lights light up when power button is pressed. When the PROG button pressed it does NOT light up any of the possible program lights.
Analysis: IT IS POSSIBLE that the machine thinks the door is still closed!
ACTION/RESOLUTION: With power off!! Obtain a stiff piece of wire and use to prise up the white (probably dirty) plasticy / nylon door ‘catch’ now stuck in the door itself. Its fiddly and you will need patience but, you will know when the ‘catch’ is up as it will look different. You might want to shape the end of your wire into a small flat ‘U’ shape about half a inch wide. An old coat hanger would be good.
Then power up and choose a program.
SCENARIO SOLVED
- You must be logged in to reply to this topic.