aeg washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › aeg washer dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 16, 2009 at 5:14 pm #42648
    dal
    Participant

    been to a customer they have a aeg L14710 VT .Machine starts up and goes about 10 15 mins and door lock clonks in and out a couple of times and E4 shows in display window Machine is only a zannusi in discuise help/??????????????????????? thanks dal >>>>>>>>>>>>>>

    January 17, 2009 at 1:56 am #274303
    leavemetogetonwithit
    Participant

    Re: aeg washer dryer

    Don’t know what e4 is but those door locks are about as reliable as a Merloni module.
    Mike.

    January 18, 2009 at 2:53 am #274304
    aqualectric
    Participant

    Re: aeg washer dryer

    E40 family of fault codes are door interlock related codes. Look for the following:-

    1) Interlock faulty;
    2) Wiring faulty;
    3) PCB faulty – Although it is worth removing and refitting the PCB connection plugs as oxidisation of the PCB edge connectors is a common fault. Removing and refitting is enough to scrape the connections clean. If that doesn’t cure it, then the power triac for the interlock will be faulty meaning, unfortunately, a new PCB.

    Hope that helps,

    Steve.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.