Service Bulletins

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #42700
    kwatt
    Keymaster

    Thread for service bulletins as they are issued.

    Please do not reply to this thread. If you need to discuss any of the issues raised by any of the bulletins please use another existing thread if there is an appropriate one available or start a new one.

    Thanks.

    K.

    #274509
    kwatt
    Keymaster

    Re: Service Bulletins

    ISE5 – CI555WH Carbon brushes

    ISE010903

    #274510
    kwatt
    Keymaster

    Re: Service Bulletins

    Bearing Kits – All Laundry Models

    ISE010904

    #274511
    kwatt
    Keymaster

    Re: Service Bulletins

    New fuse in inverter card PCB.

    Also a reminder whilst on the subject, cold weather, warm kitchen, condensation and electronics do not make for a happily ever after. Often ends in a bang.

    Please bear in mind and allow machines to warm up before you switch them on as things that go “bang” on installation are only really going to have one cause.

    K.

    #274512
    kwatt
    Keymaster

    Re: Service Bulletins

    Improved drum paddle.

    Sorry guys, catching up on this stuff so you all know about it and, if you don’t, I can shout and point here. 😆

    K.

    #274513
    kwatt
    Keymaster

    Re: Service Bulletins

    We have had a few of the gaskets that are between the cabinet and drum unit come off.

    From what we can all gather it’s where people are a bit careless loading and/or unloading and drag the laundry over the seal, thereby pulling the seal off. The cure is here.

    Gap Sealing Solution

    Of course, there are liable to be faster ways of doing this. 😉

    K.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.