Zanussi FX 1465W Door lock prob.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FX 1465W Door lock prob.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 23, 2009 at 7:55 pm #42849
    Madmac
    Participant

    Punter called me about this today, he’s put a new interlock on it apparently, having heard a bang from the door area, old interlock had blast marks. Anyway, machine still wont play ball & goes straight to ‘End’ he says .

    So im assuming interlock has taken out panel, i dont mind having a play with my soldering iron if theres any chance of success, but maybe thats very wishful thinking?

    Dont think EMW can help with recent zanussi so is thats probably a no go :rolls: Any advice chaps ? Thanks,

    Eddie.

    January 23, 2009 at 10:29 pm #275099
    aqualectric
    Participant

    Re: Zanussi FX 1465W Door lock prob.

    EMW do the EWM1000 module unit. The interlock will blow the board components as well as the tracks. Like you, I prefer to resolder PCB joints if possible, but I have had little success with this type of board.

    HTH,

    Steve.

    January 24, 2009 at 6:22 pm #275100
    Madmac
    Participant

    Re: Zanussi FX 1465W Door lock prob.

    Thanks for that, i’ll have a prod at it on Monday. 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.