Smeg DWI612 E8 error

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg DWI612 E8 error

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 27, 2009 at 11:47 am #42922
    Simon46
    Participant

    Anybody seen this fault before. Read error?

    S.

    January 27, 2009 at 11:51 am #275385
    Penguin45
    Participant

    Re: Smeg DWI612 E8 error

    Alternator valve out of circuit.

    Chris.

    January 28, 2009 at 10:34 am #275386
    Simon46
    Participant

    Re: Smeg DWI612 E8 error

    So presumably PCB or valve failed?

    S.

    January 28, 2009 at 5:17 pm #275387
    eastlmark
    Moderator

    Re: Smeg DWI612 E8 error

    alternating valve has failed, this is also in the known error codes thread

    January 28, 2009 at 10:13 pm #275388
    Lawrence
    Participant

    Re: Smeg DWI612 E8 error

    Alternate valve did one today
    Lawrence

    January 13, 2011 at 12:35 am #275389
    cornwell40
    Participant

    Re: Smeg DWI612 E8 error

    Had one of these today showing E8.
    The query is that whenever I’ve seen the E8 mentioned it happens at the start of the wash, something I’ve seen before accompanied by clicks. This one carries on for 20 or so minutes until it stops and shows the code, same thing every time its tested. Its the three button LCD display one, but in the fault code book there is no E8 shown.
    Must admit, I’ve not got it out yet as the silly woman (I know what I saw, I’m not blind :rolls: she said ) reported it as going back to p3 so I had to get her to reuse the programme again until the fault code came back.

    TC

    February 2, 2011 at 5:36 pm #275390
    keithwilliams
    Participant

    Re: Smeg DWI612 E8 error

    is this alternator part number 819130468 ? i dont have a model number yet for the one i have an e8 code. are there different versions of this part or is it common acrosss the range.
    thanks

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.