neff microwave

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › neff microwave

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 27, 2009 at 3:54 pm #42929
    kevinlewis
    Participant

    h5462nogb/02
    had blown internal fuse. replaced fuse when the door is opened turntable activates but that is all it does.
    no display either.
    any help please?

    January 27, 2009 at 6:53 pm #275406
    PINKY
    Participant

    Re: neff microwave

    Door switch!?

    January 27, 2009 at 6:53 pm #275407
    nomadPaul
    Participant

    i can’t find that model number Kevin . The turntable faut i’ve had on a microwave , inverter style , and it was one of the door switches . Might be worth checking them.

    These normally have 2 fuses – have you checked both ?

    January 27, 2009 at 7:30 pm #275408
    SWERV
    Participant

    Re: neff microwave

    Also worth checking the lamp, it may have blown and damaged the board.
    Merv

    February 3, 2009 at 4:02 pm #275409
    kevinlewis
    Participant

    Re: neff microwave

    SWITCHES ARE OK BUT IVE NOT CHECKED THE BULB SO SHALL GIVE IT A GO! THANKS FOR THE HELP GUYS

    February 4, 2009 at 10:07 pm #275410
    Dansta
    Participant

    Re: neff microwave

    Is it one of the older types with a seperate mechanical dial for the oven?If so there are 2 small glass fuses in the control p.c.b that usualy blow,I find replacing the diodes sorts the prob most of the time.

    February 5, 2009 at 10:19 am #275411
    electrofix
    Moderator

    Re: neff microwave

    agree with Swerv

    if pcb blows on some microwaves you get a feed through the lamp and the tt motor in series if you disconnect lamp will prob stop turn

    take out pcb and solder track but may have welded relay somtimes it does

    Dave

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.