apm8552

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › apm8552

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 2, 2009 at 2:19 pm #43082
    bazza500
    Participant

    Anyone known part nos for inner drum and rear tub seal for this diplomat washing machine?

    Thanks

    February 3, 2009 at 12:16 am #275996
    Penguin45
    Participant

    Re: apm8552

    720090100 – drum and shaft.
    402011900 – tub gasket.

    Chris.

    February 3, 2009 at 9:08 am #275997
    bazza500
    Participant

    Re: apm8552

    Thank you once again Chris. 😀

    February 9, 2009 at 4:40 pm #275998
    bazza500
    Participant

    Re: apm8552

    I ordered the drum for this machine. It`s different from the original in that the orginal pully was held on by a nyloc nut but the replacement needs a bolt. I cannot see any reason why I cannot just fit a bolt as everythng else looks similar. Does anyone know any different?

    Also the tub seal is completely different and will not fit. Anyone know if this is the correct part number or a packing error?

    I ordered a bearing kit BRG4646 from connect which is the equivalent to BKT36 and although the bearings are right the bearing seal is too small. The one in the kit is 35X62X10. Anyone know the part number for the correct seal or the size it should be?

    Model is APM8552 serial no. 20061503050-010103007-01 02

    Thanks for any help.

    February 9, 2009 at 6:35 pm #275999
    Washman
    Participant

    Re: apm8552

    Hi

    Just looked on service manual and it lists 720344000 drum and shaft and 402017200 tub gasket.

    Mike

    February 9, 2009 at 6:41 pm #276000
    bazza500
    Participant

    Re: apm8552

    Thanks washman.You wouldnt have the part number for the bearing seal would you?

    February 10, 2009 at 4:44 pm #276001
    bazza500
    Participant

    Re: apm8552

    anyone? 🙁

    February 10, 2009 at 6:22 pm #276002
    Washman
    Participant

    Re: apm8552

    Hi

    75026770 bearing seal.

    Mike

    February 11, 2009 at 4:58 pm #276003
    Washman
    Participant

    Re: apm8552

    Hi

    Back panel bearing assembly 718013000 complete

    Mike

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.