wf630

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wf630

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 3, 2009 at 6:12 pm #43128
    waters
    Participant

    I have a few Hotpoint WF machines which need bearings and spiders replaced.Because of the price of 30mm parts i am thinking of buying the 35mm rear drum,and replacing the spider to 35mm to fit.These machines have the small induction motor.Will the rear drum fit correct to the front drum.I seem to remember that they were slightly different and didnt match up.

    February 3, 2009 at 7:16 pm #276152
    smartin
    Participant

    Re: wf630

    there is only 1 part number for front of tub so it should in theory fit the 35mm tub rear

    February 3, 2009 at 7:17 pm #276153
    iadom
    Moderator

    Re: wf630

    They fit perfectly, the only real difference is the size of the concrete weights, they are slightly larger for the 30mm bearing & spider drum. I have fitted new rear half & shaft on several occasions without any problems.

    Jim.

    February 3, 2009 at 9:03 pm #276154
    johnnyj
    Participant

    Re: wf630

    It is only the 7kg machines that have a differant drum front half and rear half, i replace the 30 mm back half all the time with a 35 mm, the 30 mm bearings were fitted to all the 1400 spin and under machines, the 1600 spin all were fitted with 35 mm ones.

    February 4, 2009 at 9:10 am #276155
    waters
    Participant

    Re: wf630

    Thanks,when the spider needs replacing i will change both to 35mm then

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.