Bosch Classixx Diswasher constantly fills/empties

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch Classixx Diswasher constantly fills/empties

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 5, 2009 at 7:23 pm #43189
    theclubhouse
    Participant

    I have a 2 year old Bosch Classixx dishwasher (SGS55c02GB) that has developed a problem.

    When it first starts any cycle it fills up with water until the flood (float) switch is activated, it then cycles: fill up and emergency empty.

    I think the problem is that the machine does not know when it has the correct water level in it but I cannot find a level switch. There is a flow device in the inlet pipe.

    Can someone tell me how this machine is designed to know that it has sufficient water in it to wash? Is it just the flow meter, if so I will try replacing it.

    Thanks

    David

    February 5, 2009 at 8:27 pm #276322
    Penguin45
    Participant

    Re: Bosch Classixx Diswasher constantly fills/empties

    Yup, flow meter (or “impellor jug” in Boschese) will be the culprit.

    P/no 424099, spares@ukwhitegoods.co.uk will get you one promptly.

    Penguin45.

    February 5, 2009 at 8:54 pm #276323
    Turbo
    Participant

    Re: Bosch Classixx Diswasher constantly fills/empties

    When you replace the impellor jug use a hair dryer to warm the blue hose up, this will make removal of the old part so much easier.
    POWER OFF WHILE REPAIRING
    Graham

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.