- This topic has 3 replies, 2 voices, and was last updated 17 years, 2 months ago by
.
-
Posts
-
Didital condenser with a few problems.
Only some heat settings create heat whilst others are blowing cold.
Airing, cotton, synthentics and delicates create no heat
whilst wool easyiron cottons and half load.the belts come off and the drum was jammed and with a turn was freed up from what ever seemed to be restricting it and now turning free and ok?
customers complaining of no water entering the water bottle also but filter and condesor pan in base is clean and ok.
any ideas?
thanks simon
did you know that on electronic condenser, on most of the progs, the heater doesnt come on for at least ten mins?
BUT if theres no water going into the drawer, then the pump impellor may have dropped off, and needs replacing, yet if the float is activated, it will turn the heater off
the airing program is exactly that, and wont produce any heat
the drm jammed? that normally a faulty jockey wheel, that’ll need changing to.. that is of course subject to whther the capacitots faulty? was it just jammed, or did it go with a push?multiples of anwers, just more time inspecting, take off the side panel, all will be revealed.. sometimes a good old look round works wonders!
Re: HOTPOINT CTD85A
Thanks for the tip off no heat as it was digital im aware they work in weird and wonderful ways and have a mind of their very own, yes ill be going back to inspect it and it was jammed up solid and then unjammed with a push round and now turning ok?
thanks simon
- You must be logged in to reply to this topic.