TRICITY BENDIX BIW105W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › TRICITY BENDIX BIW105W

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 11, 2009 at 4:49 pm #43395
    richardable
    Participant

    visited this one, completely dead, no lights, not locking door. changed interlock to eliminate. no better. ordered new main board, fitted it today. select any wash programe…appropriate lights, door locks, machine fills, wash action. stops, drains, end light. selected spin, drain pump, motor action, great spin cycle, end light. do i need to press the option buttons in a sequence to get it out of what appears to be a default state?or is there an install reset? speedy reply if poss, customer has heaps of washing!!
    thanks
    richard

    February 13, 2009 at 6:04 pm #277124
    richardable
    Participant

    Re: TRICITY BENDIX BIW105W

    so no news on this one…customer is now going to replace the w/m..i will be getting the t/b as a project…if anyone has a fix for the board or needs a board plse let me know!
    richard

    February 13, 2009 at 7:36 pm #277125
    Turbo
    Participant

    Re: TRICITY BENDIX BIW105W

    Had this problem and it turned out to be an earth leak on the heating element.
    Graham.

    February 13, 2009 at 8:14 pm #277126
    richardable
    Participant

    Re: TRICITY BENDIX BIW105W

    turbo, thanks , i’ll try it and post back.
    richard

    February 16, 2009 at 11:19 pm #277127
    richardable
    Participant

    Re: TRICITY BENDIX BIW105W

    turbo, went to this one today to check the heater. all ok, no leak to earth, nothing showind on tester….so i ran a cycle and blow me, the thing worked perfectly. i left the customer to run some full wash programes and he says that the machine is running as it should… 😕 😮
    richard

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.