Chest Frezer Problem

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Chest Frezer Problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 17, 2009 at 9:50 pm #43563
    Shing
    Participant

    Hi,
    I got a 15 years old Levin chest freezer with Stanley steel lip. It is about 19 cu.ft . The cooling fan worn out 6 months ago. I changed the fan I found in this web site. Part no. is MF53103 – Fridge & Freezer Fan Motor. It is a 7″ fan. Just over 2 months, the fan worn out again. The fan motor got heat up and the bearing stuck( the fan won’t turn). I put another new fan in and it only last another 3 months. The fan worn out again. What is wrong? The freezer is still working with a desk fan aiming at the compressor. What can I do now? Please help!

    Cheers…
    -Shing-

    February 26, 2009 at 7:33 am #277701
    spimps
    Participant

    Re: Chest Frezer Problem

    Buy a make called Ma-vib,lots of carp motors being sold that last 3 months or so.

    February 26, 2009 at 2:48 pm #277702
    Shing
    Participant

    Re: Chest Frezer Problem

    HI spimps,
    Thanks for the reply. The problem has been solved. It turned out the wiring issue. One of the wire should be connected to the thermostat controller. Now the motor get stop when the freezer reach the set temperature. Everything is going fine now. Thanks a lot!

    -Shing-

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.